Security Labs PTZ IP Camera User Manual page 35

If you have not entered an FTP server, the above will be left <empty>.
To setup the FTP server, click "Edit" to go to the Email / FTP Page.
have entered the FTP server, login name and password, click "Apply" and then
Click on "Motion Detect" to return here.
Enter a directory or folder name in <folder>.
"System Defined / User Defined"
The administrator can also determine to either have the system automatically
assign the filenames for the pictures saved, or assign these filenames manually.
"Filename"
Give the motion detected JPG images a standard filename prefix, to be followed by
looping number suffix.
"Loop from ## to ##"
This will determine the number of suffixes preceding the above filename.
the last number is reached, the first file will be replaced by the most current image.
"Digits"
This will determine the number of digits assignable for the above number suffix.
The administrator can choose to assign between 1 to 6 digits.
Click
"Send Email"
To send an
choose "Yes", otherwise choose "No"
"Email Server"
The administrator will have to set this up.
Email / FTP Page to make the necessary configuration. Click on Motion Detection
to return here.
"Recipient" & "Email Address Book"
The administrator can determine who shall receive email notification.
the recipient list, either double click on the email in the address book or click
. To add all the email address at once, click
entry click
Click
2.4.3 Image Recording
Image recording allows the user to receive an image to either their email account or to an
FTP server. The images will be sent over a predetermined interval and a certain period.
IP Camera Manual
for an example.
email notification
, or to remove all entries from the recipient list.
to confirm and save the above settings.
Click "Apply" when done.
of Motion Detection
Otherwise, click "Edit" to go to the
Once you
Once
with image,
To add to
. To remove an
31