Security Labs PTZ IP Camera User Manual page 11

"Obtain an IP address by DHCP"
Choose this if you do not know your basic Network Configurations
"Use the following IP Address"
Enter an appropriate internal IP Address, Subnet Mask and Gateway for IP Camera
(Refer to Appendix C for an explanation of IP Addresses)
"Obtain an IP address by Bootp"
Allow IP Camera to obtain an IP address using Bootp protocol.
6. Click "Next >" to proceed to xDSL/Cable modem setup.
This section has to be configured to allow IP Camera to access the Internet through
an xDSL.