Account Settings - Security Labs PTZ IP Camera User Manual

"Login Password"
Enter your password

2.3.3 Account Settings

This section allows you to set up to eight (8) user account with different permissions for
the IP Camera.
i. User Account
"User Name" : Determine the username of visitors who can log in. The
administrator can set up to 32 case sensitive character names.
"Password" :
administrator can set up to 32 case sensitive passwords.
"Permission" :
"Operator", "Viewer" or "No Access"
Administrator:
Operator:
Viewer:
No Access:
WARNING: You must setup an Administrator account in the Setup Wizard
BEFORE setting either "Operator", "Viewer" or "No Access".
to do so will result in your being locked out of the IP Camera Web Manager!
"IP Filter"
A visitor can
for security consideration. You can restrict a user's access only from
192.168.1.0/24 by setting up "192.168.1.*".
"*.*.*.*" to allow yourself to login from any place.
IP Camera Manual
Set a password for the visitor's account.
Set the permission level to one of "Administrator",
This permission level allows
write permission to all the sections.
This permission
Camera menus,
them. The administrator can also set "Permit Hours" here for
viewing the camera.
This permission level allows you to access the IP Camera at
specific time as set in "Permit Hours" for viewing the camera. A
"Viewer" does not have write permission and can only access the
"Web Cam" and "Information" section.
This is to revoke either of the above two permission levels given
to a user and make the user account disabled.
only login with
Fig.27 IP Camera User Account Settings
you full
level allows you
but not the permission
the IP address
Otherwise,
The
access including
access to IP
to amend
Failure
specified here
leave it as
26