Related Manuals for Security Labs SLW-163
Summary of Contents for Security Labs SLW-163
- Page 1 Model SLW-163 Wireless Pan & Tilt IP Camera w/ IR Owner’s Manual 15540 Herriman Blvd. Noblesville, IN 46060 - www.security-labs.com Customer Support 1-800-774-0284...
-
Page 2: Product Description
PLEASE NOTE BEFORE YOU BEGIN This camera is designed for indoor use only. Make sure you only use the included power supply (Output: 5.0 VDC, 1.5A). Do not attempt to open the case. There are no user serviceable parts inside. Do not aim the camera at the sun or similar intense light. -
Page 3: Package Contents
PACKAGE CONTENTS Glossary of terms: LAN – Local Area Network WAN – Wide Area Network (Internet) ISP – Internet Service Provider ADSL (or DSL) – Asymmetric Digital Subscriber Line DHCP – Dynamic Host Configuration Protocol DNS- Domain Name System (supplied by your ISP) DDNS –... - Page 4 Click Next, to complete the software installation. The computer will restart upon completion of the installation and a new icon will appear on the desktop automatically called 'IP Camera Tool'. Double click the icon to start the IP Camera Tool software. The software is designed to search the Local Area Network (LAN) for any similar IP cameras or devices.
- Page 5 After searching, the software will give one of 3 results: 1) Connected IP cameras are located on the LAN - All similar IP cameras will be displayed in the result field as shown below. 2) No IP Camera found within LAN - After a one minute search, the result field will show “Not Found - IP Server”...
-
Page 6: Reset Button
Click on Network Configuration Network Configuration Configure the Network parameters from this page. Note: Check the box “Obtain IP from DHCP server” or manually enter your address information. • DHCP checkbox: If checked, the camera will obtain an IP address from the DHCP server in your router. - Page 7 Click the 'Sign in' button as shown below: Note: If you are using a PC, follow the top link for IE Browsers. This will activate ActiveX which allows access to additional functions of the user interface. If you are a Mac or Firefox user, you can view the camera via the second link, Server Push Mode.
- Page 8 7. Confirm the Network Type and Encryption used are correct. 8. Enter your network password or share key. 9. Click <Submit>, and return to <Live Video>. 10. After completion, remove and re-apply power to the camera to initialize settings. You may remove the LAN cable at this time, and place the camera at its intended location.
- Page 9 If more than one camera has been added to the Multi-Device Menu in the ActiveX mode (Internet Explorer), you can view multiple cameras using the Internet Explorer web browser. Select the icons according to the view preferred; Full Screen , Quad, or 3 x 3. Add timestamp on record When checked, a time/date stamp will be added in the bottom right corner of recorded videos.
- Page 10 Users\Documents. In Windows Vista, there are two points you need to notice: • Vista's Security level is higher than Windows XP/2000. For the 'Set Record Path' function, you will need to add the add the Device IP address to IE's 'Trusted sites' first.
-
Page 11: For Administrator
Click to return the settings to the factory defaults. For Administrator When you login as an Administrator, the 'For Administrator' functions are enabled. Device Info - You can find information about the camera such as the Device ID, Firmware Version and Embeded Web UI (User Interface) Version. Note: Always click “Submit”... - Page 12 UPnP Settings - Access this page to activate Universal Plug ‘n Play to sync with routers that have the same function. This helps with port forwarding and viewing via the internet. Upgrade Device Firmware - If directed by our customer service technician, you can upgrade the camera's Firmware and device embedded web UI (User Interface) software on this page.
- Page 13 IP address or DDNS domain being entered directly into a web browser’s address bar (as an example: http://202.96.133.134: 9008 or http://ipcamera.dyndns.org:9008). 9008 being the port number forwarded in the router at the location (LAN) of the camera. Enter in the Host box: 202.96.133.134, Http Port box:9008 or Host: ipcamera.dyndns.org, Http Port: :9008.
- Page 14 ADSL Settings When connecting to the Internet via ADSL, enter the ADSL username and password obtained from your ISP. DDNS Service Settings If a static IP address (one that never changes) is not readily available from your ISP, a DDNS service can be used to provide an address for your camera that will remain the same, making it easier for you to contact your camera via the internet.
- Page 15 Mail Service Settings Configure the Email addresses that will receive and send mails after a motion detection alarm.
- Page 16 Sender – Enter the e-mail address to be used for the sender. Receiver – Enter up to four receiver e-mail address SMTP Server - The SMTP server for the sender mailbox. Need Authentication - Check the box if the email needs authentication then input the SMTP User Name &...
- Page 17 FTP settings. If successful, it will display the prompt “Success”. Alarm Service Settings (Motion Detection) Enter the Alarm Service Settings page to configure the Motion Detection function. When you enable motion detection, the camera can be triggered to send email alerts and upload images. Motion Detection Sensitivity - You can choose a level from 1 to 10.
- Page 18 ACCESSING YOUR WIFI CAMERA ia LAN (Local Area Network) Four ways: 1. Click on the shortcut on your computer to run the IP Camera Tool, then click on the camera listed that you wish to view. -or- 2. Enter the local IP address of the camera into the address bar of your preferred browser.
- Page 19 Via a Mobile Device (Smartphone) View your IP camera using your mobile device’s web browser. Enter the LAN IP and port number you assigned to the camera if you are within the range of your wireless router. Enter the WAN IP and port number into the address bar if you are trying to view your camera via the internet.
- Page 20 Notice the IP Address and Subnet Mask. Make sure the camera is set to the same subnet. Port Numbers If you are running any firewall software, make sure it's allowing inbound connections to port 81. Also, if you are using a Cable or DSL router, make sure you've set up port forwarding properly (consult your router's documentation for more information).
- Page 21 A. Add your cameras port number to the port forwarding list. B. Enable the UPnP (Universal Plug ‘n Play) option on your router and on the camera’s UPnP Settings Menu. C. If your router has a Virtual Map Function, add the camera’s IP address and port number to the Virtual Map List.
- Page 22 Click the options as shown below:...
- Page 24 Click ‘OK’ Further permission can be granted by clicking on Trusted Sites on the Security Page, and adding the IP address of the camera to the Trusted Sites list. Trusted sites can have their own set of security settings that are much less restrictive to ActiveX and other common internet threats.
- Page 25 PRIVACY FROM ILLEGAL RECORDINGS MADE ON THIS UNIT. THE USER/OWNER ASSUMES FULL LIABILITY FOR ANY AND ALL RECORDINGS MADE FROM THIS UNIT IN A SECURITY OR SURVEILLANCE OPERATION OR IN ANY OTHER USE. SECURITY LABS IS NOT RESPONSIBLE FOR RECORDINGS THAT VIOLATE LAWS OR THAT MAY PROVE OFFENSIVE OR TEND TO INCRIMINATE ANOTHER INDIVIDUAL.