Ip Address; Advanced - Security Labs PTZ IP Camera User Manual

This section allows you to determine IP address configuration for the IP Camera.
Select the IP Camera on the right display screen, and then click "IP Configuration". This
will bring up the IP Address Configuration window. There are two tabs;

• IP Address

• Advanced (for port setting configuration)
2.3.1 IP Address
Use this section to set the IP Address of IP Camera.
When using y o u r IP Camera for the first time, it is advisable to choose the "Using
Static IP Address" option.
Subnet Mask and Gateway (refer to Appendix C for IP address explanation).
Fig.10 IP Configuration: Set an IP Address for IP Camera
Once the IP Address is set, you will be able to connect to t h e IP Camera
webpage by entering this IP Address into a standard browser.
"Obtain an IP address by DHCP or BOOTP"
The IP address,
and assigned automatically by the system.

2.3.2 Advanced

This section sets
devices thru IP Camera Utility.
IP Camera Manual
For this option, you will have to enter an IP Address,
Subnet Mask and
security password
Gateway is acquired
against unauthorized
directly
access to
15