Security Labs PTZ IP Camera User Manual page 61

1. Log into your router
2. On the router's main page, click on Advanced at the top of the page.
3. On the next page, click on Forwarding.
4. Enter the following information on the page:
Line #1:
Customized Applications:
Ext. Port:
Protocol:
IP Address:
Enable:
Line #2:
Customized Applications:
Ext. Port:
Protocol:
IP Address:
Enable:
5. Click on Apply to save the settings. IP Camera should now be configured to
work with your router and be accessible from the internet.
Microsoft (http://www.microsoft.com/hardware/broadbandnetworking)
MN-100 – Wired Base Station
MN-500 – Wireless Base Station
1. Log into your router
2. Open the Bass Station Management Tool, and then click Security.
3. On the Security
click Set up persistent port forwarding.
4. In the Enable checkbox, check in the checkbox.
5. In the Description
field such as:
IP Camera Web.
6. In the Inbound port boxes, type in: 80 – 80. (i.e. from Port 80 to Port 80)
7. In the Type box, select the protocol as TCP.
8. In the Private IP address box, type in the IP Address of the IP
Camera network camera. For example, type in: 192.168.0.5.
9. In the Private port boxes, these values are automatically filled in from Step 6
and should already show 80 – 80.
10. On the next empty line, repeat steps 4-9, except this time the Description
should be IP Camera Cam and the Inbound/Private port boxes should be 9001 –
9001 (UDP). The protocol and private IP address should be the same.
11. Click Apply to save the changes you have made. IP Camera should now be
configured to work with your router and be accessible from the internet.
IP Camera Manual
IP Camera – Webpage
80 to 80
TCP
Type in the camera's IP address, for example: 192.168.0.5
Checked in
IP Camera – Camera
9001 to 9001
UDP
Type in the camera's IP address, for example: 192.168.0.5
Checked in
menu, click Port
box, type a
Forwarding,
description of the
and then
server
53