Language; About - Security Labs PTZ IP Camera User Manual

"System Name"
This is to give IP Camera a name identifiable in a SNMP network.
"System Contact"
This is to give the administrator a name.
"System Location"
This is to set IP Camera location.
"Manager IP Address"
This sets the IP address where the administrator can manage IP Camera from. It is
valid for up to 8 IP addresses.
addresses leave it as *.*.*.*.
"Community"
This is to set a Community name for NMS. The community name has to be the
same as that set in NMS.
"Permission"
This is to set the administrator's authority. Options are Read, Read/Write, and No
Access.
"Description"
This is for an administrator to make notes.

2.4.6 Language

Use this section to set IP Camera Interface language.
i. Interface Language
At the moment, the administrator can only choose between; English, Chinese
(Traditional) and Chinese (Simplified).
ii. Email Preference
Click "Yes" to apply language interface to Email notification.

2.4.7 About

The administrator
save/restore settings, upgrade firmware and see manufacturer's details.
i. About
This section
Firmware Version, Hardware Version and Serial Number.
To manage y o u r IP Camera from any IP
can use this section
gives crucial
to check firmware
information about t h e IP Camera's
information,