Security Labs PTZ IP Camera User Manual page 34

i. Camera A (or Camera B)
"Enable"
To activate motion detect, the administrator has two options;
a. "Always On" or
b. "On Schedule", the administrator can set up to 4 different time slots for motion
detection.
"Detection Sensitivity"
This will determine the level of change necessary before motion capture is triggered.
"Send image every"
Select a value between 1 to 5 seconds.
"Stop sending emails after ## email(s) or image idle for ## second(s)"
The IP Camera will stop sending on the lesser of the two conditions.
can set between 1, 3, 5, 7 and 10 seconds. Emails can be set from 1 to 99999
pieces, or
0 for stop sending email only when image is idle.
"Schedule"
If set to "On Schedule" in the above section, the administrator can then input the
four preferred schedule time slots for motion detection.
24hr format.
"Send to FTP Server"
This option allows the administrator to send and store the motion detected images
on a FTP site.
"Yes" to activate.
"ftp://<empty>/<folder>"
This box allows the administrator to determine the file location within the FTP site
IP Camera Manual
Fig.35 IP Camera Motion Detection Page
This is useful for future reference and recording purpose.
You
Time must be entered in
Click
30