Security Labs PTZ IP Camera User Manual page 65

Line #2
Private IP: Type in the camera's IP address, for example: 192.168.0.5 (Look at
IP Camera's IP Address LCD display for the last 3 digits of the camera's
IP address)
Privateport: 9001
Type: UDP
Public Port: 9001
4. Click Enter to save the settings. IP Camera should now be configured to work
with your router and be accessible from the internet.
SpeedStream 2604 – 4-port DSL/Cable Router
1. Log into your router.
2. After you are logged in, click on Advanced Setup -> Virtual Servers.
3. Under the Properties section, there are a few entries you'll need to add. Check
in the checkbox for Enable.
4. Under the first box, next to the Enable checkbox, type in: IP Camera Web.
5. Under PC (Server), select your camera or the camera's IP address from the
list. If the camera is not listed, select the link titled "My PC is not listed."
6. Leave Protocol as TCP.
7. Under Internal Port No type in: 80
8. Under External Port No type in: 80
9. Click on Add to save these settings.
10. Under the first box, next to the Enable checkbox, type in: IP Camera Cam.
11. Under PC (Server), select your camera or the camera's IP address from the
list. If the camera is not listed, select the link titled "My PC is not listed."
12. Leave Protocol as TCP.
13. Under Internal Port No type in: 9001
14. Under External Port No type in: 9001
15. Click on Add to save these settings. IP Camera should now be configured to
work with your router and be accessible from the Internet.
SMC (http://www.smc.com)
SMC2404WBR – Barricada Turbo 11/22 Mbps Wireless Cable/DSL Broadband
Router
SMC7004VBR – Barricada Cable/DSL Broadband Router
SMC7004CWBR – Barricada Wireless Cable/DSL Broadband Router
1. Log into your router.
2. After you are logged in, click NAT on the left side of the page.
3. Click on Virtual Server on the left side of the page.
IP Camera Manual 57