Security Labs PTZ IP Camera User Manual page 68

Method 4: Using IE Browser
This method uses IE to update the latest firmware. Open IE, then type in the
account, password and IP Camera IP address to be updated in the following format,
ftp://<username>:<password>@<IP Camera IP address>.
Once logged in, the current firmware and version will be displayed. Copy the latest
firmware to here to complete the updating process.
There are two methods to log in:
(a) ftp://admin:password@192.168.50.179
Enter the
enter IP Camera's default value:
Username: admin
Password: <blank>
(example: ftp://admin:@192.168.50.179)
(b) ftp://192.168.50.179/
The follow error message will show, when the above is entered. Ignore it and
select "Enter Identity" at the top left corner of file menu. Then enter "admin" as
the User Name and <blank> Password to re-enter.
IP Camera Manual
password that was set earlier using Netility. Otherwise,
60