Security Labs PTZ IP Camera User Manual page 29

"Connection Type"
This item sets the communication speed between t h e IP Camera and the
Network. The IP Camera will reboot after "Connection Type" is changed.
v. Dynamic DNS
"Service Provider"
The IP Camera can be configured to register the current IP to a dynamic DNS
provider. This will enable you to locate the IP Camera's IP address every time
the dynamically assigned IP address changes. Before you use this function,
you will have to register with either one of these four service providers;
• None (Select this to disable the DDNS function)
• 3322.org
• dhs.org
• dyndns.org
• myddns.com
"Domain Name" :Enter the Domain Name you have created from one of the
four websites.
"Login Name" : Enter your login name for the above domain name. You
only have to configure once.
"Login Password": Enter your password. You only have to configure once.
vi. PPPoE
Use this option to allow the IP Camera to directly dial-up using your xDSL modem
and connect to the Internet. Once set-up, t h e IP Camera will be able to stream
video images directly to the Internet without going thru an IP router.
"When Connection should be made"
You have a choice of:
Disabled
Connect always
"Login Name"
Enter your login name
IP Camera Manual
Fig.25 IP Camera Dynamic DNS Settings
Fig.26 IP Camera PPPoE setting
: Default setting. IP Camera does not dial in
: IP Camera will automatically dial in.
25