Security Labs PTZ IP Camera User Manual page 49

Enable Motion Detect:
Sensitivity:
Image Recording
Click Start Recording when Motion Detected to enable this feature. Click the "Details" button
for the following option;
Image Compression:
Recording AVI File
Path
Recorded files are saved using the following file extension;
CMV[year][month][date][hour][minute][seconds]. The time here denotes the record start time.
Note: Use the "Detail View" to check the record stop time. You can change the display view or
add a new folder here.
Stop after idle for:
IP Camera Manual
Click the checkbox to enable Motion Detection.
Note: This function requires the Camera Window be active. Click
"Monitor" to activate the Window.
Choose from 0% to 100% (very sensitive)
Choose from the list of available compressions.
Note: This list is
available /
installed on the local PC.
Location where the file will be recorded to.
Click "Browse" to change the file location.
Set the value between 1 to 100 seconds
dependent on the Codec that is
41