Table of Contents
Advertisement
Chapter 2 Hardware
2.3 Phone Functions
This section describes how to use your V310's basic telephone functions. See
for information on the using the V310's LCD screen menus and
information on how to use the V310's phonebook.
2.3.1 Making a Call
You can configure two SIP accounts (LINE1 and LINE2) on the V310. Outgoing calls use the first
SIP account by default.
Start the call:
1
• If you want to use the handset with the first SIP account:
Lift the handset.
• If you want to use the speakerphone with the first SIP account:
Press the SPEAKER key.
• If you want to use the speakerphone with a specific SIP account:
Press the LINE1 or LINE2 key.
• If you want to use the second SIP account and the first account is in use:
Press the HOLD key to put the first call on hold, and then press the LINE2 key.
Check that you can hear a dial.
2
Enter the number you want to call. If you have numbers stored in the V310's phone book, you can
3
use the navigator to select from the list of entries.
Press the # key.
4
During the call:
• If you are using the speakerphone, you can switch to the handset by lifting it off the hook.
• If you are using the handset, you can switch to the V310's speakerphone by pressing the
SPEAKER key.
Note that the call ends if you are using the speakerphone and press the SPEAKER key.
2.3.2 Receiving a Call
When the phone rings, do one of the following:
• Pick up the handset to receive the call using the handset.
• Press the SPEAKER key to receive the call using the internal speakerphone.
• Press the LINE1 or LINE2 key to answer calls using a specific SIP account.
2.3.3 Ending a Call
When you want to end a call, do one of the following:
• If you are using the handset, replace it in the cradle.
20
Chapter 4 on page 35
Chapter 5 on page 39
for
V310 User's Guide
Advertisement
Table of Contents
