Table of Contents
Advertisement
POWER SUPPLY
Connect the mains lead to a standard, 230 Volt (50Hz) electrical supply through an approved 13 amp
BS 1363 plug, or a suitably fused isolator switch.
WARNING! THIS APPLIANCE MUST BE EARTHED
IMPORTANT: The wires in the mains lead are coloured in accordance with the following code:
Green & Yellow
Blue
-
Neutral
Brown -
Live
As the colours of the flexible lead of this appliance may not correspond with the coloured markings
identifying terminals in your plug proceed as follows:
•
Connect GREEN & YELLOW coloured cord to plug terminal marked with a letter "E" or Earth symbol
"
" or coloured GREEN or GREEN & YELLOW.
•
Connect BROWN coloured cord to plug terminal marked with a letter "L" or coloured RED.
•
Connect BLUE coloured cord to plug terminal marked with a letter "N" or coloured BLACK.
If this appliance is fitted with a plug which is moulded onto the electric cable (i.e. non-rewirable)
please note:
1.
The plug must be thrown away if it is cut from the electric cable. There is a danger of electric
shock if it is subsequently inserted into a socket outlet.
2.
Never use the plug without the fuse cover fitted.
3.
Should you wish to replace a detachable fuse carrier, ensure that the correct replacement is used
(as indicated by marking or colour code).
4.
Replacement fuse covers can be obtained from your local dealer or most electrical stockists.
5.
The fuse in the plug must be replaced with one of the same rating (5 amps) and this replacement
must be ASTA approved to BS1362.
The maximum length of cable between fuse and supply, should be no greater than 1.5m
NOTE: This is for illustration only. NEVER operate the machine with the cover removed.
-
Earth
7
Hide quick links:
Advertisement
Table of Contents
