Electrical Connections - Clarke CONTRACTOR CON850BSITE Operation & Maintenance Instructions Manual

ELECTRICAL CONNECTIONS

WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS
THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS
SUPPLY.
Before switching the product on, make sure that the voltage of your electricity
supply is the same as that indicated on the rating plate. Connecting it to any
other power source may cause damage.
If the plug has to be changed due to damage, a replacement should be
fitted, following the wiring instructions shown below. The old plug must be
disposed of as insertion into a 110v socket could cause an electrical hazard.
WARNING: THE WIRES IN THE POWER CABLE OF THIS PRODUCT ARE
COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:
WHITE = NEUTRAL
If the colours of the wires in the power cable of this product do not correspond
with the markings on the terminals of your plug, proceed as follows.
• The White wire must be
connected to the
terminal which is
marked N or Neutral.
• The Black wire must
be connected to the
terminal which is
marked L or Live.
If in any doubt, consult a
qualified electrician. DO
NOT attempt any repairs yourself.
This symbol indicates that this is a Class II product, and does not
require an earth connection.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
BLACK = LIVE
Plug must be BS60309 approved.
Neutral
(White)
3
Live
(Black)