Placing Or Answering A Call; Adjusting Call Volume And Muting; Putting A Call On Hold; Using Dial Assistance - Cisco SPA 525G User Manual

Use the delChar softkey button to backspace and delete the last character. Use the Option > Clear softkey
button to remove the entire entry.

Placing or Answering a Call

NOTE You may have to dial a number or numbers to reach an outside line. Ask your phone administrator.
STEP 1
STEP 2

Adjusting Call Volume and Muting

Putting a Call on Hold

Cisco S pa 5 25 U ser G uide V 7.11
9 wxyz9WXYZ
0 Space 0 ~ ? > ʻ < "
* . @ * & % [ ] _
#/P # + - = ( ) { }
To place or answer a call, do one of these:
• Pick up the receiver.
• Press the Speaker button.
• Press the Headset button.
• Press a green line button (to place a call) or a red flashing line button or the Answer
softkey (to answer a call).
If you are on a call and another call comes in, choose one of the following options:
• Press the Answer softkey. (Press the Ignore softkey to ignore the incoming call.)
• Press the flashing red line button.
The call in progress is put on hold and the incoming call is answered.
To return to the first call, press the flashing red line button, or select the call on the
screen using the Up Arrow or Down Arrow key and press the Resume softkey.

Using Dial Assistance

If dial assistance is enabled, when placing calls, youʼll see a list of closely-matched
phone numbers on the screen after you begin dialing. If you want to choose one of these
numbers:
Use the navigation button to scroll down and highlight a phone number on
the LCD screen.
Press the Select button or Dial to complete the call.
See "Enabling Dial Assistance,"
Adjusting Call Volume
To adjust the volume while you are on a call, press + on the Volume button to
increase the volume, or press - to decrease the volume. Press Save.
Pressing the Volume button while not on a call adjusts the volume of the phoneʼ s
ringer.

Using Mute

To mute the phone microphone, speaker, or headset microphone, press the Mute
button on the phone. The button lights red. Press the Mute button again to unmute.
To put a call on hold, press the Hold button. A series of beeps indicates the call is on
hold.
for more information on enabling this feature.
7