Table of Contents
Advertisement
Using Basic Phone Functions
Adjusting Call Volume and Muting
Adjusting Call Volume and Muting
Placing or Answering a Call
Cisco Small Business IP Phone SPA 50X User Guide (SPCP)
Adjusting Call Volume
To adjust the volume of the handset or speaker during a call, press + on the Volume
button to increase the volume, or press - to decrease the volume. The volume leve
will return to the previous level when you disconnect the call. To retain the setting,
press OK (except on the Cisco SPA501G) and the setting is saved.
Adjusting the Ringer Volume
To adjust the ringer volume, press the Volume button when the handset is on the
phone and the speaker is off. Retain the setting by pressing OK (except on the
Cisco SPA501G) and the setting is saved.
Muting a Call
To mute the phone microphone, speaker, or headset microphone, press the Mute
button on the phone. The button glows red. Press the Mute button again to unmute.
There are several ways to place or answer a call:
•
Pick up the handset.
•
Press the Speaker button.
•
Press the Headset button.
•
Press a configured line button (to place a call) or a green flashing line button
(to answer a call). (Not applicable to the Cisco SPA502G).
You might have to dial a number or series of numbers to reach an outside line. Ask
your phone administrator for specific information.
3
22
Hide quick links:
Advertisement
Table of Contents
