Protocol Template; Port Enable - TP-Link TL-SL5428E User Manual

6.3.2 Protocol Template

The Protocol Template should be created before configuring the Protocol VLAN. By default, the
switch has defined the IP Template, ARP Template, RARP Template, etc. You can add more
Protocol Template on this page.
Choose the menu VLAN→Protocol VLAN→Protocol Template to load the following page.
The following entries are displayed on this screen:
Create Protocol Template

Protocol Name:
Ether Type:
Protocol Template Table

Select:
Protocol Name:
Ether Type:
Note:
The Protocol Template bound to VLAN can not be deleted.

6.3.3 Port Enable

On this page, you can enable the port for the Protocol VLAN feature. Only the port is enabled, can
the configured Protocol VLAN take effect.
Choose the menu VLAN→Protocol VLAN→Port Enable to load the following page.
Figure 6-10 Create and View Protocol Template
Give a name for the Protocol Template.
Enter the Ethernet protocol type field in the protocol template.
Select the desired entry. It is multi-optional.
Displays the name of the protocol template.
Displays the Ethernet protocol type field in the protocol template.
59