TP-Link TL-SL5428E User Manual page 77

Select your desired port for VLAN Mapping function. All the ports are disabled for VLAN Mapping
function by default.
Note:
When VPN mode is globally enabled, VPN function takes effect on all ports. If VPN mode is
disabled, VLAN Mapping function can be enabled by selecting your desired port on this Port
Enable page.
Configuration Procedure of VLAN VPN Function:
Step Operation
1 Enable VPN mode.
2 Configure the global TPID.
3 Set the VPN up-link port.
4 Create VLAN
entries.
5 Create SP
Provider) VLAN.
Configuration Procedure of VLAN Mapping Function:
Step Operation
1 Create VLAN
entries.
2 Enable VLAN
function for port.
Figure 6-14 Enable VLAN Mapping for Port
Description
Required. On the VLAN→VLAN VPN→VPN Config page,
enable the VPN mode.
Optional. On the VLAN→VLAN VPN→VPN Config page,
configure the global TPID basing on the devices connected
to the up-link port.
Required. On the VLAN→VLAN VPN→VPN Config page,
specify the desired port to be the VPN up-link port. It's
required to set the port connected to the backbone
networks to be up-link port.
Mapping Required. On the VLAN→VLAN VPN→VLAN Mapping
page, configure the VLAN Mapping entries basing on the
actual application.
(Service Optional. On the VLAN→802.1Q VLAN page, create the
SP VLAN. For the steps of creating VLAN, please refer to
802.1Q VLAN.
Description
Mapping Required. On the VLAN→VLAN VPN→VLAN Mapping
page, configure the VLAN Mapping entries basing on the
actual application.
Mapping Required. On the VLAN→VLAN VPN→Port Enable page,
enable VLAN Mapping function for the ports.
68