TP-Link TL-SL5428E User Manual page 41

The following entries are displayed on this screen:
Port Security

Select:
Port:
Max Learned MAC:
Learned Num:
Learn Mode:
Status:
Note:
1. The Port Security function is disabled for the LAG port member. Only the port is removed from
the LAG, will the Port Security function be available for the port.
2. The Port Security function is disabled when the 802.1X function is enabled.
Figure 5-3 Port Security
Select the desired port for Port Security configuration. It is
multi-optional.
Displays the port number.
Specify the maximum number of MAC addresses that can be
learned on the port.
Displays the number of MAC addresses that have been learned
on the port.
Select the Learn Mode for the port.

Dynamic: When Dynamic mode is selected, the learned
MAC address will be deleted automatically after the aging
time.

Static: When Static mode is selected, the learned MAC
address will be out of the influence of the aging time and can
only be deleted manually. The learned entries will be cleared
after the switch is rebooted.

Permanent: When Permanent mode is selected, the
learned MAC address will be out of the influence of the
aging time and can only be deleted manually. The learned
entries will be saved even the switch is rebooted.
Select Enable/Disable the Port Security feature for the port.
32