14.4 Application Example for Cluster Function
Network Requirements
Three switches form cluster, one commander switch and two member switches. The administrator
manages all the switches in the cluster via the commander switch.
Port 1 of the commander switch is connecting to the external network, port 2 is connecting to
member switch 1 and port 3 is connecting to member switch 2.
IP pool: 175.128.0.1, Mask: 255.255.255.0.
Network Diagram
Configuration Procedure
Configure the member switch
Step Operation
1
Enable NDP function on the
switch and for port 1
2
Enable NTDP function on the
switch and for port 1
Configure the commander switch
Step Operation
1
Enable NDP function on the
switch and for ports 1-3
2
Enable NTDP function on the
switch and for ports 1-3
Figure 14-19 Network diagram
Description
On Cluster→NDP→NDP Config page, enable NDP
function.
On Cluster→NTDP→NTDP Config page, enable
NTDP function.
Description
On Cluster→NDP→NDP Config page, enable NDP
function.
On Cluster→NTDP→NTDP Config page, enable
NTDP function.
217