Snmp Config; Global Config - TP-Link TL-SL5428E User Manual

SNMP module is used to configure the SNMP function of the switch, including three submenus:
SNMP Config, Notification and RMON.

12.1 SNMP Config

The SNMP Config can be implemented on the Global Config, SNMP View, SNMP Group,
SNMP User and SNMP Community pages.

12.1.1 Global Config

To enable SNMP function, please configure the SNMP function globally on this page.
Choose the menu SNMP→SNMP Config→Global Config to load the following page.
The following entries are displayed on this screen:
Global Config

SNMP:
Local Engine

Local Engine ID:
Remote Engine

Remote Engine ID:
Note:
The amount of Engine ID characters must be even.
Figure 12-3 Global Config
Enable/Disable the SNMP function.
Specify the switch's Engine ID for the remote clients. The
Engine ID is a unique alphanumeric string used to identify the
SNMP engine on the switch.
Specify the Remote Engine ID for switch. The Engine ID is a
unique alphanumeric string used to identify the SNMP engine
on the remote device which receives informs from switch.
178