TP-Link TL-SL5428E User Manual page 225

If the switch is a commander switch in the cluster, please take the following steps.

Step Operation
1 Enable the NDP function
globally and for the port,
and then configure NDP
parameters
2 Enable the NTDP function
globally and for the port,
and then configure NTDP
parameters
3 Establish a
configure the
parameters
4 Manage the device in the
cluster
If the switch is a member switch in the cluster, please take the following steps.

Step Operation
1 Enable the NDP function
globally and for the port,
and then configure NDP
parameters
2 Enable the NTDP function
globally and for the port,
and then configure NTDP
parameters
3 Manually collect
information
4 View the
information
switches in the cluster.
Description
Optional. On Cluster→NDP→NDP Config page, enable the
NDP function on the switch.
Optional. On Cluster→NTDP→NTDP Config page, enable
the NTDP function on the switch.
cluster and Optional. On Cluster→Cluster→Cluster Config page,
related establish a cluster and configure the related parameters.
Optional. On Cluster→Cluster→Member Config page,
select the desired member switches and click the Manage
button to log on to its Web management page for
configuration.
Or
On Cluster→Cluster→Collect Topology page, double-
click the icon of the switch to view its detailed information;
click the icon, and then click the Manage button to log on to
its Web management page for configuration.
Description
Optional. On Cluster→NDP→NDP Config page, enable the
NDP function on the switch.
Optional. On Cluster→NTDP→NTDP Config page, enable
the NTDP function on the switch.
NTDP Optional. On Cluster→NTDP→Device Table page, click the
Collect
information.
Or
On Cluster→Cluster→Cluster Topology page, click the
Collect Topology button to manually collect NTDP information.
detailed Optional. On Cluster→Cluster→Cluster Topology page,
of other double-click the icon of the switch to view its detailed
information.
Topology button to manually collect NTDP
216