Radius Server - TP-Link TL-SL5428E User Manual

11.5.3 Radius Server

RADIUS (Remote Authentication Dial-In User Service) server provides the authentication service
for the switch via the stored client information, such as the user name, password, etc, with the
purpose to control the authentication and accounting status of the clients. On this page, you can
configure the parameters of the authentication server.
Choose the menu Network Security→802.1X→Radius Server to load the following page.
The following entries are displayed on this screen:
Authentication Config

Primary IP:
Secondary IP:
Auth Port:
Auth Key:
Accounting Config

Accounting:
Primary IP:
Secondary IP:
Accounting Port:
Accounting Key:
Figure 11-24 Radius Server
Enter the IP address of the authentication server.
Enter the IP address of the alternate authentication server.
Set the UDP port of authentication server(s). The default port is 1812
Set the shared password for the switch and the authentication
servers to exchange messages.
Enable/Disable the accounting feature.
Enter the IP address of the accounting server.
Enter the IP address of the alternate accounting server.
Set the UDP port of accounting server(s). The default port is 1813.
Set the shared password for the switch and the accounting
servers to exchange messages.
174