The following entries are displayed on this screen:
Port Filter Config
Port Select:
Select:
Port:
Filter:
Action Mode:
Bound IP-Range (ID):
Max Groups:
LAG:
Note:
1.
Multicast Filter feature can only have effect on the VLAN with IGMP Snooping enabled.
2.
Multicast Filter feature has no effect on static multicast IP.
3.
Up to 15 IP-Ranges can be bound to one port.
Figure 8-11 Port Filter
Click the Select button to quick-select the corresponding port
based on the port number you entered.
Select the desired port for multicast filtering. It is multi-optional.
Displays the port number.
Select Enable/Disable multicast filtering feature on the port.
Select the action mode to process multicast packets when the
multicast IP is in the filtering IP-range.
Permit: Only the multicast packets whose multicast IP is in
the IP-range will be processed.
Deny: Only the multicast packets whose multicast IP is not in
the IP-range will be processed.
Enter the IP-rang ID the port will be bound to. The binding
IP-range IDs of the port can be cleared by entering null value in
this field and click Apply button to submit the configuration.
Specify the maximum number of multicast groups to prevent some
ports taking up too much bandwidth.
Displays the LAG number which the port belongs to.
114