Snmp User - TP-Link TL-SL5428E User Manual

Group Table

Select:
Group Name:
Security Model:
Security Level:
Read View:
Write View:
Notify View:
Operation:
Note:
Every Group should contain a Read View. The default Read View is viewDefault.

12.1.4 SNMP User

The User in a SNMP Group can manage the switch via the management station software. The
User and its Group have the same security level and access right. You can configure the SNMP
User on this page.
Choose the menu SNMP→SNMP Config→SNMP User to load the following page.
The following entries are displayed on this screen:
User Config

User Name:
Select the desired entry to delete the corresponding group.
multi-optional.
Displays the Group Name here.
Displays the Security Model of the group.
Displays the Security Level of the group.
Displays the Read View name in the entry.
Displays the Write View name in the entry.
Displays the Notify View name in the entry.
Click the Edit button to modify the Views in the entry and click the
Modify button to apply.
Figure 12-6 SNMP User
Enter the User Name here.
181
It's