LAG:
9.3.3 OUI Config
The switch supports OUI create and add the MAC address of the special voice device to the OUI
table of the switch. The switch determines whether a received packet is a voice packet by
checking its OUI address.
Choose the menu QoS→Voice VLAN→OUI Config to load the following page.
The following entries are displayed on this screen:
Create OUI
OUI:
Mask:
Description:
OUI Table
Select:
OUI:
Mask:
Description:
Configuration Procedure of Voice VLAN:
Step Operation
1
Configure the link type of
the port
Displays the LAG number which the port belongs to.
Figure 9-14 OUI Configuration
Enter the OUI address of the voice device.
Enter the OUI address mask of the voice device.
Give a description to the OUI for identification.
Select the desired entry to view the detailed information.
Displays the OUI address of the voice device.
Displays the OUI address mask of the voice device.
Displays the description of the OUI.
Description
Required. On VLAN→802.1Q VLAN→Port Config page,
configure the link type of ports of the voice device.
131