VLAN ID:
Description:
Check:
VLAN Members
Port Select:
Select:
Port:
Link Type:
Egress Rule:
LAG:
6.1.2 Port Config
Before creating the 802.1Q VLAN, please acquaint yourself with all the devices connected to the
switch in order to configure the ports properly.
Choose the menu VLAN→802.1Q VLAN→Port Config to load the following page.
The following entries are displayed on this screen:
Enter the ID number of VLAN.
Give a description to the VLAN for identification.
Click the Check button to check whether the VLAN ID you entered
is valid or not.
Click the Select button to quick-select the corresponding entry
based on the port number you entered.
Select the desired port to be a member of VLAN or leave it blank.
It's multi-optional.
Displays the port number.
Displays the Link Type of the port. It can be reset on Port Config
screen.
Select the Egress Rule for the VLAN port member. The default
egress rule is UNTAG.
TAG: All packets forwarded by the port are tagged. The
packets contain VLAN information.
UNTAG: Packets forwarded by the port are untagged.
Displays the LAG to which the port belongs.
Figure 6-5 802.1Q VLAN – Port Config
53