For a candidate switch, the following page is displayed.
The following entries are displayed on this screen:
Current Role
Role:
Role Change
Individual:
Commander:
For a commander switch, the following page is displayed.
Figure 14-14 Cluster Configuration for Commander Switch
Figure 14-13 Cluster Configuration for Candidate Switch
Displays the role the current switch plays in the cluster.
Select this option to change the role of the switch to be individual
switch.
Select this option to change the role of the switch to be
commander switch, and then configure the cluster:
Cluster Name: Configure the name of the current cluster the
switch belongs to.
IP Pool & Mask: Configure the private IP range of the member
switches in the cluster.
212