Table of Contents
Advertisement
Chapter 3 The Connection Wizard
You cannot use the Wizard if the PPPoE remote server cannot be discovered
automatically. You must use the screens discussed in
instead.
Figure 12 Connection Wizard > ISP Parameters (PPPoE)
The following table describes the labels in this screen.
Table 8 Connection Wizard > ISP Parameters (PPPoE)
LABEL
Connection Type
Service Name
User Name
Password
< Back
Next >
Exit
42
DESCRIPTION
Select PPP over Ethernet.
Enter the PPP service name provided by your ISP. If your ISP did not provide a
service name, leave this field blank.
Enter the user name provided by your ISP.
Enter the password provided by your ISP.
Click this to go to the previous screen.
Click this to go to the next screen.
Click this to close this screen and return to the main screen.
Chapter 5 on page 57
P-2024 User's Guide
Advertisement
Table of Contents
Troubleshooting
