Table of Contents
Advertisement
Table 22 VoIP > SIP > SIP Settings > Advanced
LABEL
Expiration
Time
Fax Option
G.711 Fax
Passthrough
T.38 Fax
Relay
Call Forward
Call Forward
Table
Caller Ringing
Enable
On Hold
Enable
<Back
Apply
Reset
6.2.3 SIP QoS Screen
Use this screen to maintain ToS and VLAN settings for the P-2024. To access this screen, click
VoIP > SIP > QoS.
Figure 30 VoIP > SIP > QoS
P-2024 User's Guide
DESCRIPTION
Keep the default value, unless your VoIP service provider tells you to change it.
Enter the number of seconds the SIP server should provide the message waiting
service each time the P-2024 subscribes to the service. Before this time passes,
the P-2024 automatically subscribes again.
These fields control how the P-2024 handles fax messages.
Select this if the P-2024 should use G.711 to send fax messages. The peer
devices must also use G.711.
Select this if the P-2024 should send fax messages as UDP or TCP/IP packets
through IP networks. This provides better quality, but it may have inter-operability
problems. The peer devices must also use T.38.
Select which call forwarding table you want the P-2024 to use for incoming calls.
You set up these tables in VoIP > Phone Book > Incoming Call Policy.
Select the check box to have people hear a tone from the P-2024 when they
call you.
Select the check box if you want people to hear a tone when you put them on
hold.
Click this to return to the SIP Settings screen without saving your changes.
Click this to save your changes and to apply them to the P-2024.
Click this to set every field in this screen to its last-saved value.
Chapter 6 SIP
77
Advertisement
Table of Contents
Troubleshooting
