Wan Internet Connection Screen (Pppoe); Figure 20 Network > Wan > Internet Connection (Ethernet); Table 17 Network > Wan > Internet Connection (Ethernet) - ZyXEL Communications P-2024 User Manual

Figure 20 Network > WAN > Internet Connection (Ethernet)
Each field is described in the following table.
Table 17 Network > WAN > Internet Connection (Ethernet)
LABEL
ISP Parameters
for Internet
Access
Encapsulation
Service Type
WAN IP Address
Assignment
Get
automatically
from ISP
Use Fixed IP
Address
IP Address
IP Subnet
Mask
Gateway IP
Address
Apply
Cancel

5.2.2 WAN Internet Connection Screen (PPPoE)

Use this screen to set up a PPPoE connection with the ISP. To access this screen, click
Network > WAN > Internet Connection.
P-2024 User's Guide
DESCRIPTION
Select Ethernet. Ethernet encapsulation with Service Type set to Standard is
typically used if you are extending your existing network.
Select Standard.
Select this if your ISP did not assign you a static IP address or if you want another
DHCP server to assign an IP address to the P-2024.
Select this if your ISP assigned you a static IP address.
Enter the IP address provided by your ISP.
Enter the subnet mask provided by your ISP.
Enter the gateway provided by your ISP. If your ISP did not provide one, leave it
blank.
Click this to save your changes and to apply them to the P-2024.
Click this to set every field in this screen to its last-saved value.
Chapter 5 WAN
59