Table 13 Status Screen - ZyXEL Communications P-2024 User Manual

Chapter 4 Status Screens
Each field is described in the following table.

Table 13 Status Screen

LABEL
Refresh Interval
Refresh Now
Device
Information
System Name
Firmware
Version
WAN Information
IP Address
IP Subnet
Mask
DHCP
System Status
System Up
Time
Current Date/
Time
System Resource
CPU Usage
Memory
Usage
Interface Status
Interface
Status
48
DESCRIPTION
Enter how often you want the P-2024 to update this screen.
Click this to update this screen immediately.
This field displays the P-2024 system name. It is used for identification. You can
change this in the Configuration Wizard or Maintenance > System > General
screen.
This field displays the current version of the firmware inside the P-2024. It also
shows the date the firmware version was created. You can change the firmware
version by uploading new firmware in Maintenance > Tools > Firmware.
This field displays the current IP address of the P-2024 in the WAN.
This field displays the current subnet mask in the WAN.
This field displays what DHCP services the P-2024 is using on the WAN. Choices
are:
Client - The P-2024 is a DHCP client in the WAN. Its IP address comes from a
DHCP server on the WAN.
None - The P-2024 is not using any DHCP services in the WAN. It has a static IP
address.
You can change this in the Network > WAN screen.
This field displays how long the P-2024 has been running since it last started up.
The P-2024 starts up when you plug it in, when you restart it (Maintenance >
Tools > Restart), or when you reset it (see
This field displays the current date and time in the P-2024. You can change this in
Maintenance > System > Time Setting.
This field displays what percentage of the P-2024's processing ability is currently
in use. When this percentage is close to 100%, the P-2024 is running at full load,
and the throughput is not going to improve anymore. If you want some
applications to have more throughput, you should turn off other applications.
This field displays what percentage of the P-2024's memory is currently used.
Usually, this percentage should not increase much. If memory usage does get
close to 100%, the P-2024 is probably becoming unstable, and you should restart
the device. See Section 12.3 on page
power) for a few seconds.
This column displays each interface the P-2024 has.
This field indicates whether or not the P-2024 is using the interface.
Up - The P-2024 is using the interface.
Down - The P-2024 is not using the interface.
Section 1.5 on page 31).
119, or turn off the device (unplug the
P-2024 User's Guide