Table of Contents
Advertisement
Chapter 12 Tools
Table 54 Maintenance > Tools > Configuration
LABEL
Upload
Back to Factory
Defaults
Reset
12.2.1 Restore Configuration Screens
Do not turn off the device while configuration file upload is in progress.
When the P-2024 has finished restoring the selected configuration file, the following screen
appears.
Figure 51 Configuration Upload Successful
The device now automatically restarts. This causes a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 52 Network Temporarily Disconnected
If the P-2024's IP address is different in the configuration file you selected, you may need to
change the IP address of your computer to be in the same subnet as that of the default
management IP address (192.168.5.1). See your Quick Start Guide or the appendices for
details on how to set up your computer's IP address.
You might have to open a new browser to log in again.
If the upload was not successful, a Configuration Upload Error screen appears.
118
DESCRIPTION
Click this to restore the selected configuration file. See
for more information about this.
Note: Do not turn off the device while configuration file upload is in
progress.
Click this to clear all user-entered configuration information and return the P-2024
to its factory defaults. There is no warning screen.
Section 12.2.1 on page 118
P-2024 User's Guide
Advertisement
Table of Contents
Troubleshooting
