Log Message Descriptions; Table 44 System Error Logs - ZyXEL Communications P-2024 User Manual

Chapter 11 Logs
Table 43 Maintenance > Logs > Log Settings
LABEL
Log Schedule
Day for
Sending Log
Time for
Sending Log
Clear log after
sending mail
Syslog Logging
Active
Syslog Server
IP Address
Log Facility
Active Log and
Alert
Log
Send
immediate
alert
Apply
Reset

11.3 Log Message Descriptions

The following tables provide descriptions of example log messages.

Table 44 System Error Logs

LOG MESSAGE
WAN connection is down.
%s exceeds the max.
number of session per
host!
110
DESCRIPTION
Select the frequency with which the P-2024 should send log messages by e-mail.
• Daily
• Weekly
• Hourly
• When Log is Full
• None.
If the Weekly or the Daily option is selected, specify a time of day when the E-mail
should be sent. If the Weekly option is selected, then also specify which day of the
week the E-mail should be sent. If the When Log is Full option is selected, an
alert is sent when the log fills up. If you select None, no log messages are sent.
This field is only available when you select Weekly in the Log Schedule field.
Select which day of the week to send the logs.
This field is only available when you select Daily or Weekly in the Log Schedule
field.
Enter the time of day in 24-hour format (for example 23:00 equals 11:00 pm) to
send the logs.
Select this to clear all logs and alert messages after logs are sent by e-mail.
Syslog logging sends a log to an external syslog server used to store logs.
Select this to enable syslog logging.
Enter the server name or IP address of the syslog server that logs the selected
categories of logs.
Select a location. The log facility allows you to log the messages in different files in
the syslog server. See the documentation of your syslog server for more details.
Select the categories of logs that you want to record.
Select the categories of alerts that you want the P-2024 to send immediately.
Click this to save your changes and to apply them to the P-2024.
Click this to set every field in this screen to its last-saved value.
DESCRIPTION
The WAN connection is down. You cannot access the network
through this interface.
This attempt to create a NAT session exceeds the maximum
number of NAT session table entries allowed to be created per
host.
P-2024 User's Guide