Figure 98 Displaying Log Categories Example; Figure 99 Displaying Log Parameters Example - ZyXEL Communications P-2024 User Manual

Appendix E Command Interpreter
Configuring What You Want the P-2024 to Log
1 Use the
configure which logs the P-2024 is to record.
2 Use

Figure 98 Displaying Log Categories Example

ras> sys logs category
8021x
error
javablocked
cdr
tcpreset
urlforward
3 Use
are available for the category.

Figure 99 Displaying Log Parameters Example

ras> sys logs category access
Usage: [0:none/1:log/2:alert/3:both] [0:don't show debug type/1:show debug
type]
4 Use
record.
Use 0 to not record logs for that category, 1 to record only logs for that category, 2 to
record only alerts for that category, and 3 to record both logs and alerts for that category.
Not every parameter is available with every category.
5 Use the
in order to record logs).
Displaying Logs
• Use the
• Use the
log categories.
• Use the
individual P-2024 log category.
• Use the
170
command to load the log setting buffer that allows you to
sys logs load
to view a list of the log categories.
sys logs category
access
icmp
mten
pki
traffic
wireless
sys logs category
followed by a log category and a parameter to decide what to
sys logs category
command to store the settings in the P-2024 (you must do this
sys logs save
sys logs display
sys logs category display
sys logs display [log category]
command to erase all of the P-2024's logs.
sys logs clear
attack display
ike ipsec
packetfilter ppp
tls remote
upnp urlblocked
followed by a log category to display the parameters that
command to show all of the logs in the P-2024's log.
command to show the log settings for all of the
command to show the logs in an
P-2024 User's Guide