Table of Contents
Advertisement
3.1.5.2 PPPoE
You cannot use the Wizard if the PPPoE remote server cannot be discovered
automatically.
Figure 15 Connection Wizard > IP Address (PPPoE)
The following table describes the labels in this screen.
Table 11 Connection Wizard > IP Address (PPPoE)
LABEL
My WAN IP
Address
First DNS Server
Second DNS
Server
Third DNS Server
< Back
Next >
Exit
P-2024 User's Guide
DESCRIPTION
Enter the IP address provided by your ISP.
Select From ISP if your ISP dynamically assigns DNS server information. (In this
case, the ISP assigns the WAN IP address too. See Network > WAN > Internet
Connection.) The field to the right is read-only, and it displays the IP address
provided by your ISP.
Select User-Defined if you have the IP address of a DNS server. You might get it
from your ISP or from your network. Enter the IP address in the field to the right.
Select None if you do not want to use this DNS server. If you select None for all of
the DNS servers, you must use IP addresses to configure the P-2024 and to
access the Internet.
Click this to go to the previous screen.
Click this to go to the next screen.
Click this to close this screen and return to the main screen.
Chapter 3 The Connection Wizard
45
Advertisement
Table of Contents
Troubleshooting
