ZyXEL Communications P-2024 User Manual page 49

Table 13 Status Screen
LABEL
Rate
Summary
Packet
Statistics
VoIP Statistics
VoIP Status
Account
Registration
URI
VoIP Mapping
P-2024 User's Guide
DESCRIPTION
If the interface uses Ethernet encapsulation, this column displays the port speed
and the Ethernet duplex setting. Duplex settings are:
Full - The P-2024 is using full-duplex Ethernet.
Half - The P-2024 is using half-duplex Ethernet.
You cannot change the Ethernet duplex setting on the P-2024.
If this interface uses PPPoE encapsulation, this column displays the port speed
and the status of the call.
Down - The connection is not available.
Dial - The P-2024 is making a call.
Idle - The call is connected.
Drop - The P-2024 is ending the call.
The LAN interface always uses Ethernet encapsulation. You can change the
encapsulation of the WAN interface in Network > WAN > Internet Connection.
Click (Details ...) to open the Packet Statistics window. See
50.
Click (Details ...) to open the VoIP Statistics window. See
51.
These fields display only when you click the VoIP Status tab.
This column displays each SIP account in the P-2024.
This field displays the current registration status of the SIP account. You have to
register SIP accounts with a SIP server to use VoIP.
If the SIP account is already registered with the SIP server,
• Click Unregister to delete the SIP account's registration in the SIP server. This
does not cancel your SIP account, but it deletes the mapping between your
SIP identity and your IP address or domain name.
• The second field displays On Register.
If the SIP account is not registered with the SIP server,
• Click Register to have the P-2024 attempt to register the SIP account with the
SIP server.
• The second field displays the reason the account is not registered.
Inactive - The SIP account is not active. You can activate it in VoIP > SIP > SIP
Settings.
Not Register - The SIP account is active, but you have not tried to register it yet.
Register Fail - The last time the P-2024 tried to register the SIP account with the
SIP server, the attempt failed.
This field displays the account number and service domain of the SIP account.
You can change these in VoIP > SIP > SIP Settings.
These fields display only when you click the VoIP Mapping tab.
Chapter 4 Status Screens
Section 4.2 on page
Section 4.3 on page
49