ZyXEL Communications P-2024 User Manual page 106

Chapter 10 System
Table 40 Maintenance > System > Time Setting
LABEL
New Time
New Date
Get from Time
Server
Time Protocol
Time Server
Address
Time Zone Setup
Time Zone
Daylight
Savings
Start Date
End Date
Apply
Reset
106
DESCRIPTION
Enter the new time in this field, and click Apply.
Enter the new date in this field, and click Apply.
Select this if you want to use a time server to update the current date and time in
the P-2024.
Select the time service protocol that your time server uses.Check with your ISP or
network administrator, or use trial-and-error to find a protocol that works.
Daytime (RFC 867) - This format is day/month/year/time zone.
Time (RFC 868) - This format displays a 4-byte integer giving the total number of
seconds since 1970/1/1 at 0:0:0.
NTP (RFC 1305) - This format is similar to Time (RFC 868).
Enter the IP address or URL of your time server. Check with your ISP or network
administrator if you are unsure of this information.
Select your location's time zone.
Select this if your location uses daylight savings time. Daylight savings is a period
from late spring to early fall when many places set their clocks ahead of normal
local time by one hour to give more daytime light in the evening.
Enter which hour on which day of which week of which month daylight-savings
time starts.
Enter which hour on the which day of which week of which month daylight-savings
time ends.
Click this to save your changes and to apply them to the P-2024.
Click this to set every field in this screen to its last-saved value.
P-2024 User's Guide