Tools Needed For Installation
Safety Recommendations
Warning
The following tools will be required to install your Polycom SoundStructure
unit:
•
A Phillips head screwdriver for installing rack ears and rack-mounting the
device.
•
A small blade screwdriver for terminating audio cables to the terminal
blocks.
Read and understand the following instructions before using the system:
•
Always disconnect the system from power before inserting plug-in cards
into the SoundStructure device.
•
Only connect the system to surge protected power outlets.
•
Only use electrical extension cords with a current rating at least equal to
that of the system.
•
Always disconnect the system from power before cleaning and servicing
and when not in use.
•
Do not spray liquids directly onto the system when cleaning. Always
apply the liquid first to a static free cloth.
•
Do not immerse the system in any liquid or place any liquids on it.
•
Do not disassemble this system. To reduce the risk of shock and to
maintain the warranty on the system, a qualified technician must perform
service or repair work.
•
Keep ventilation openings free of any obstructions.
•
If the system or any accessories are installed in an enclosed space such as
a cabinet or equipment rack, ensure that the air temperature in the
enclosure does not exceed 40° C (104° F). Forced cooling may be required
to keep the equipment within its operating temperature range.
Save these safety instructions.
Preparing For Installation
1 - 5