Tools Needed For Installation; Safety Recommendations - Polycom SoundStructure C16 Hardware Installation Manual

Hardware Installation Guide for the Polycom SoundStructure
SoundStructure Components
Power Cable
Conference Link2 insert plugs
Rubber Feet
18" Conference Link2 Cable
Software CD
The SoundStructure C16, C12, SR12, and C8 devices have 33, 25, 25, and 17
terminal block connectors respectively including one for the optional IR receiver
accessory. The Conference Link2 cable is not included with the SR12.
Check Polycom.com for the latest version of firmware and SoundStructure Studio.
For a complete list of available SoundStructure accessories, see Accessories.

Tools Needed for Installation

The following tools will be required to install your Polycom SoundStructure unit:
● A Phillips head screwdriver for installing rack ears and rack-mounting the device.
● A small blade screwdriver for terminating audio cables to the terminal blocks.

Safety Recommendations

Read and understand the following instructions before using the system:
Polycom, Inc.
Graphic
8