Polycom HDX 4000 User Manual page 37

Polycom, Inc.
To use the chair control options when you are in a multipoint call:
In the browser address line, enter the HDX system's IP address to access
1
its web interface.
To use the HDX web interface, you must use Internet Explorer version 6.x, 7.x, or
8.x and configure your browser to allow cookies. Enter the IP address of the HDX
system using the http://IPaddress (for example, http://10.11.12.13) or
https://IPaddress format. If you operate within a secure environment with the
Maximum Security Profile or Security Mode enabled, you must use the
https://IPaddress format.
Using the HTTPS protocol ensures that the configuration of all login information
(such as user names and passwords) are transmitted using an encrypted channel,
including those user names and passwords used to communicate with third-party
systems on your network. Using the HTTPS protocol severely limits the ability of
anyone on the network to discover these credentials.
Click Place a Call.
2
Click Chair Control to go to the Chair Control screen.
3
The Chair Control option is only available when the system is in a multipoint call. It
is not available in cascaded multipoint calls.
Select a site from the list, and then use the controls in the web interface to
4
perform one of these actions:
If you are... You can do this...
Chair controller Pass chair control to the selected sites.
View the selected site's video. This
remains in effect until you choose Stop
Viewing Site or you release chair
control.
Return to viewing the video selected by
the chair or by the host.
Send your site's video to the other sites.
Send the selected site's video to the
other sites.
Remove the selected site from the
conference.
Disconnect all sites and end the call.
User's Guide for Polycom HDX Desktop Systems
By selecting...
Release Chair
View Site
Stop Viewing Site
Make Me the
Broadcaster
Select
Broadcaster
Disconnect Site
End Conference
33