Using The Keypad; Powering The System On And Off; Powering The Polycom Hdx 4000 System On And Off - Polycom HDX 4000 User Manual

Using the Keypad

Switch between computer
desktop and video conference
Cycle through display layouts
Navigate through menus
Zoom the camera in or out
Return to the previous screen
Place or answer a call; indicates
call status
View or manage directory
Display the onscreen keyboard
Display menu of optional
Delete letters or numbers
Press once for a dot, twice for a
colon, three times for an asterisk

Powering the System On and Off

Powering the Polycom HDX 4000 System On and Off

Polycom, Inc.
You use the keypad to place calls, adjust the volume, navigate screens, and
select options. To access keypad help, press
views
features
Caution. In order to avoid corrupting the file system, always power off a Polycom
HDX system using the power button on the system. After turning the power off in
this way, wait at least 15 seconds before you unplug the system from its power
source. This helps ensure that the system powers off correctly.
The Power button affects any HDX system within the range of the remote
control, regardless of the Channel ID setting.
To power on the Polycom HDX 4000 system:
>> Press the power button on the front or the side of the system.
The Polycom splash screen is displayed within about 10 seconds.
User's Guide for Polycom HDX Desktop Systems
Home and then
Start and stop showing computer
desktop content to far sites
Access onscreen help; see system
status in a call
Confirm your current selection;
perform functions on highlighted
items
Select the far-site or near-site camera
to control
End a call
Increase or decrease the sound you
hear from the far sites and your
computer
Enter letters or numbers; move the
camera to a stored position
Mute the microphone audio you're
sending to the far sites
Info.
3