Including Multiple Sites In Calls; Placing A Multipoint Call - Polycom HDX 4000 User Manual

Hide thumbs Also See for HDX 4000:
Table of Contents

Advertisement

Including Multiple Sites in Calls

Placing a Multipoint Call

Polycom, Inc.
Icon
Presence
In a Call
Unknown Presence
Idle
Offline
You can view Contact details in the system's local interface. Highlight the
Contact and press
speed, and group.
During a multipoint call, multiple sites can see and hear each other. You can
also share content in a multipoint call, just as you can in a point-to-point call.
All systems can participate in multipoint calls. To host multipoint calls, your
system must have optional software installed. You can host multipoint calls
using a video conferencing system with multipoint capabilities, or you can use
a bridge such as the Polycom RMX 1000, Polycom RMX 2000, or Polycom
MGC™.
If your multipoint calls disconnect after 5 minutes, your system might be set up for
the multipoint trial. To do untimed multipoint conferences, a multipoint key must be
installed. Contact your administrator for assistance.
How you place a multipoint call depends on whether you're using a Polycom
HDX system with multipoint capabilities or a bridge such as the Polycom
MGC or Polycom RMX conference platform. The number of sites allowed in
the call is determined by the capabilities of the system or bridge hosting the
call. The call can include any combination of IP H.323, SIP, ISDN, V.35/Serial,
and audio-only endpoints, although some ISDN systems might not be
configured to allow mixed IP and ISDN calls. For more information about call
types, refer to
Types of Video Calls You Can Make
User's Guide for Polycom HDX Desktop Systems
Description
The system is set to Available and is registered
with a presence service. It is in a call but is
available to receive another call.
The presence state is unknown. The Contact
was created locally or is not registered with a
presence service.
The system is a desktop client that is available
but is currently idle.
The system is powered off or is offline.
. A dialog appears with the display name, address, call
on page 9.
29

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HDX 4000 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

3725-26470-004/a

Table of Contents