Attaching And Removing The - Fujitsu ETERNUS DX60 S2 User Manual

Chapter 2 Standard Operations
2.3 Attaching and Removing the Front Cover
2.3 Attaching and Removing the Front Cover
This section explains how to attach and remove the front cover of the 3.5" type controller
enclosure or 3.5" type drive enclosure.
■
Procedure for attaching the front cover
Attach the front cover in the following order.
Procedure
1
ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
Do
CAUTION
• After completing the operation, be sure to reattach the front cover.
This section explains how to attach and remove the front cover of the 3.5"
type controller enclosure, but the same procedure is used to attach and
remove the front cover of the 3.5" type drive enclosure.
Fit the front cover in the left end slot of the controller enclosure to attach.
Be careful so that the part of the front cover to be fit in the slot does
IMPORTANT
not touch the power switch (
Slot
Copyright 2013 FUJITSU LIMITED
).
37
P3AM-5512-05ENZ0