Handling The Data Cartridge; Attaching The Data Cartridge Label - Fujitsu PRIMERGY LTO4 User Manual

4.2

Handling the Data Cartridge

Follow the notes below when handling the data cartridge.
• Keep the data cartridge clean.
• Place the data cartridge in the operation environment for at least 24 hours before using it, in order
to acclimate the data cartridge to the environment.
• Check the following points before using the data cartridge.
- There is no damage to or cracks in the data cartridge.
- The label is correctly attached to the data cartridge.
"4.2.1 Attaching the Data Cartridge Label"(p.76)
- The leader pin is correctly attached to the data cartridge.
"4.2.4 Checking the Condition of the Leader Pin on the Data Cartridge"(p.78)
• Do not insert a damaged data cartridge into this product.
• Do not open the data cartridge to take the magnetic tape out.
• Do not directly touch the magnetic tape.
• Do not expose the data cartridge to direct sunlight or place it in a humid place.
• Do not leave the data cartridge near a strong magnetic field (e.g. near a display or speaker).
• Do not use a data cartridge that has had a strong shock such as being dropped or falling.
4.2.1

Attaching the Data Cartridge Label

A label to be attached to the data cartridge is provided with the data cartridge. Attach the label at the
location shown in the following figure. Write the date one year after starting date of the data cartridge
use to specify the expiration date.
Make sure to use the provided label.
Do not attach the label to a location other than the specified one.
76
Label location
Label example:
Expiration date: October 1, 2009