Table of Contents
Advertisement
4.4 Partition drive
The fixed drive (1 or 2 partition drives) or "automatic partition drive" can be selected by the DIP
switch and commands. It should be selected according to the power supply and print duty.
1) Fixed partition
S1-3
Fixed partition select
1) 2 fixed partition select may decrease print speed.
2) 2 fixed partition select may decrease print quality.
2) Automatic partition drive
NP-226 Less than 248 dots
NP-326 Less than 352 dots
1. Automatic partition drive select will automatically change the print speed according to
print ratio. Print noise may appear.
2. The default value selected by commands will be the fixed partition selected by. The
DIP switch. Refer to the section 5.3.
3. Automatic partition select may decrease print quality.
4.5 Select Full size and half size character
Character
Japanese
Command[FS &],[FS .] or Switching Shift JIS code
Korean
Command[FS &]、[FS .]
Please refer to the followings
st
1
byte
Chinese
nd
2
byte
rd
3
byte
th
4
byte
Greek
No switch (Only Full size)
Polish
No switch (Only half size)
Russian
No switch (Only half size)
Scandinavian No switch (Only half size)
Turkish
No switch (Only half size)
D-F0390 NP-326 Product specifications Ver.0.02
Function
2 partitions
1 partition
Higher than 249 dots
Higher than 353 dots
1 byte code (Half size)
00 h ～ 80 h
ON
Automatic partition drive
2 partitions
How to select
2 byte code (Full size)
81 h ～ FE h
40 h ～ 7E h
80 h ～ FE h
18
OFF
4 byte code (Full size)
81 h ～ FE h
30 h ～ 39 h
81 h ～ FE h
30 h ～ 39 h
Advertisement
Table of Contents
