Power Supply Specifications - Star Micronics NP-226 Product Specifications

2.3 Power supply specifications (Under review)
1) Power supply input connector
Optional AC adapter will be used for this printer（Power to be supplied from outside）
Connector on printer side ：TCS7960-532010 Hosiden or equivalent
Connector on Adapter side ：TCP8927-631100 Hosiden or equivalent
No
1
2
3
Shell
2) Power voltage
3) Current consumption *1, *2
Standby
Printing average of 25%
Printing average of 100%
*1: A sufficient volume of power supply is required to maintain print quality due to high peak current that
may run according to printing.
*2: If power supply cable is excessively long, the operation may become unstable. Cable should be
made as short as possible. If not available, connect cables near the printer and place an electrolysis
condenser of 2200µ between power supply and ground. Voltage resistance should be higher than 35V.
* For preventing from static electric discharge, make sure to connect FG wire.
D-F0390 NP-326 Product specifications Ver.0.02
Function
+24V
GND
N.C
FG
NP-226
1 partition
Approx. **A
Approx. **A
Approx. **A
Connector drawing
1
: DC24V±5%
2 partition
Approx. **A
Approx. **A
Approx. **A
6
3
2
NP-326
1 partition 2 partition
Approx. **A Approx. **A
Approx. **A Approx. **A
Approx. **A Approx. **A