Star Micronics NP-226 Product Specifications page 27

7) Overall print mode setting: << ESC ! n >>
Code
Sets print mode. "n" has following meanings
Bit
0
1
2
3
4
5
6
7
* If double height and double width are set at the same time quadruple character will be formed.
* All of the printed characters will be underlined except for the 90° rotated characters and spaces
created by horizontal tab.
* Underline width is determined by the value set in [Underline set/reset] section.
The default value is "1".
* Different sizes of character mixed such as double width and normal size can be printed.
* The default value of "n" is [00]h.
* Font B is only effective when select Japanese mode AND select overseas code, domestic code
or code 858 with character code table select command.
8) Download characters set/reset : << ESC % n >>
* Effective only when select Japanese mode
Code
Setting or resetting the characters to be downloaded.
* Only LSB (b0) is valid for "n" value. LSB (b0) has the following meanings.
9) Definition of download character :<< ESC & s n m a Dn >>
* Effective only when select Japanese mode
Code
Definition of download character( such as alpha numeric).
1. "s" indicates a number of bytes in a vertical direction and "a" is a number of dots in
horizontal direction.
2. "n" indicates the start character code, and "m" means the end character code. If only 1
character should be defined, then n = m.
3. Definable characters are from <20>h to <7E>h in ASCII code (95 characters).
4. "Dn" indicates the data to be defined. It indicates the "a" dots pattern from the left.
Remaining area on the right of a character is filled with spaces.
5. Once a download character is defined, it remains valid until the download character is
redefined, printer is initialized, or the power is turned off.
6. Only area specified will be reset.
D-F0390 NP-326 Product specifications Ver.0.02
: [1B] h + [21] h + n
Function
Character font
Undefined
Undefined
Bold
Double height
Double width
Undefined
Underline
: [1B] h + [25] h + n
b0 Function
0 Resets download chraracter
1 Sets download chraracter
Default value is "n" = [00]h
: [1B ] h + [26] h + s + n + m + a + Dn
* font A [ 01≤a≤0C ] h
* [00≤n≤FF] h
Values
0
Font A Font B
-
-
Reset
Reset
Reset
-
Reset
* [00≤n≤FF]h
* [s = 03 ] h
* [20≤n≤7E ] h
* [20≤m≤7E ] h
* font B [ 01≤a≤09] h
23
1
-
-
Set
Set
Set
-
Set