Star Micronics NP-226 Product Specifications page 47

57) Raster bit image
Code
Data is printed in a raster bit image.
・Dn is a raster bit image data.
・The printer prints raster bit image of width n1 byte by height n2+(256*n3) dot lines.
・The total byte of the requested raster bit image data (Dn) is n1*(n2+(256*n3)).
・Raster bit image data (Dn) exceeding the printing field will be disregarded.
・Raster bit image data (Dn) interprets bit"1" as print and bit"0" as not print.
・Relation between raster bit image data (Dn) and printed dots are as follows.
n2+(256*n3)dots
・Please add the command of 《ESC J 00h》( [1B] h + [4A] h + [00] h) at the end.
・If you send this command consecutively, please add 《ESC J n》 (n≠ [ 00] h) at the end of
each image, and add the《ESC J 00h》at the very end of the image.
D-F0390 NP-326 Product specifications Ver.0.02
:<< ESC b n1 n2 n3 Dn >>
: [1B] h + [62] h + n1 + n2 + n3 + Dn
D1
Dn1+1
Dn1*2+1
MSB
n1 byte
D2
Dn1+2
Dn1*2+2
43
* [00≤n1≤36] h : NP-226
* [00≤n1≤36] h : NP-326
* [00≤n2≤FF] h
* [00≤n3≤FF] h
Dn1
Dn1*2
Dn1*3
Dn1*(n2+(256*n3))
LSB